R46 Revolution Series Dual-Mode Pre-programmed LED Light is a plug-n-play led light that full-color warning lamps which override to full-white work/scene lights. No split colors here!
With TOMAR’s advanced Clear Vision Optics™, we can effectively transform every one of your warning lights into powerful, steady-burn white lamps for additional scene lighting. This has been especially popular in rural or wildland areas. These lamps come pre-programmed to flash and meet SAE, NFPA 1900 and 1906, and CA-13 requirements for emergency vehicles with the primary wire; and steady burn with the secondary wire. No programming needed means your vehicle is up and running faster!
Phases Explained
The lamps are grouped in “pairs” by the end two digits. For example, a R46D-W-RW-01 and a R46D-W-RW-02 are opposite phases of each other. This means, when powered at the same time (such as the vehicle’s master emergency mode being activated), the lamps will flash at opposite timing. For dual-color lamps which have no “off” time, they flash opposite colors of each other. This makes installation of TOMAR’s warning lights simple, without the need programming.
See product options to select phase one or phase two
NOTE: One Lamp will must be selected that is phase one and then another lamp that is phase zero must be selected in order for these pre-programmed LED lights to work correctly.
R46 Revolution Series Dual-Mode Pre-programmed LED Light is a plug-n-play led light that full-color warning lamps which override to full-white work/scene lights. No split colors here!
With TOMAR’s advanced Clear Vision Optics™, we can effectively transform every one of your warning lights into powerful, steady-burn white lamps for additional scene lighting. This has been especially popular in rural or wildland areas. These lamps come pre-programmed to flash and meet SAE, NFPA 1900 and 1906, and CA-13 requirements for emergency vehicles with the primary wire; and steady burn with the secondary wire. No programming needed means your vehicle is up and running faster!
Phases Explained
The lamps are grouped in “pairs” by the end two digits. For example, a R46D-W-RW-01 and a R46D-W-RW-02 are opposite phases of each other. This means, when powered at the same time (such as the vehicle’s master emergency mode being activated), the lamps will flash at opposite timing. For dual-color lamps which have no “off” time, they flash opposite colors of each other. This makes installation of TOMAR’s warning lights simple, without the need programming.
See product options to select phase one or phase two
NOTE: One Lamp will must be selected that is phase one and then another lamp that is phase zero must be selected in order for these pre-programmed LED lights to work correctly.
